Product Not Found
Product Not Found
We can't find the page you're looking for.
Determine Your Location
You can see special services by selecting your address or location information.
Product Not Found
Product Not Found
We can't find the page you're looking for.

What is the minimum quantity required for placing an order?

Our company operates under all necessary conditions to meet customer demands. Stock control is conducted along with order information. In cases where the requested products are not in stock, production plans are reviewed, and delivery times are communicated. There is no minimum order limit.

How can I check the stock status of the products I want?

All of our products are almost custom-made. However, we try to stock the most frequently shipped products. We always have in stock Pe100 products in 63-75-90-110-160 mm pipes, PVC products in 160-200-225 mm pipes, and corrugated products in 200-300-400 mm sizes.

How can I reach the nearest dealer?

You can contact our company via email, phone, or fax. We can direct you to the nearest dealer or take your order directly and have our products delivered to you through our dealer. You can reach us at

Do you provide delivery services to difficult delivery points?

If customers specify their delivery addresses during the order process, our logistics team will deliver the products to the desired location regardless of the difficulty.

What are the return conditions?

Our products are of a special nature and can only be returned in the event of defects that occur during quality control or shipping.

Which pipes can be used for drinking water transportation?

You can use our HDPE pipes and pressure PVC pipes for drinking water transportation. Our water pipes are certified according to Turkish food standards. For choosing water pipes, you can also contact our sales unit.

What does HDPE mean?

HDPE stands for High-Density Polyethylene. It is a petrochemical product and a plastic derivative chemical.

What is a Pe 100 pipe?

Pe100 pipes are produced using the Pe100 raw material, a derivative of high-density polyethylene. These pipes are distinguished by their high liquid carrying capacity in high-pressure classes.

How are the weights of Pe 100 pipes calculated?

The weights of Pe100 pipes are calculated based on the density values of the raw material used, the pipe diameter, and wall thickness. For detailed information, visit this link.

How are Pe 100 pipe fittings determined?

Pe100 pipe systems are generally high-pressure systems. The fittings to be used in these systems are determined according to the pressure class of the products, application area conditions, and specific conditions in the system's operating principles. These conditions determine the use of Electro Fusion, Butt Welding, and Push-fit fittings.

What is the lifespan of Pe 100 pipes?

The lifespan of Pe100 pipes is predicted to be at least 50 years, although the actual lifespan is much longer.

How resistant are Pe pipes to chemicals?

Pe100 pipes are resistant to many chemicals. The chemical resistance table can be found here.

What is the minimum bending radius for PE pipes?

Pipe SDRMinimum Bending Radius
9DN x 12
11DN x 15
13.6DN x 21
17 / 17.6DN x 25
21DN x 35
26DN x 45
33DN x 65

For example, for a 250 mm SDR 11 pipe, the bending radius is 250 x 15 = 3.75m.

How are Pe 100 pipes coiled?

Pe100 pipes are coiled according to standards, considering the minimum bending radius. Production is done with nested alternatives and according to the transport method and batch size. The standard table can be found here.

Which pipes can be coiled?

Our Pe pipes can be delivered coiled for the following diameters:

  • 16 mm Pe100 Pipe (16-20 Bar and above)
  • 20 mm Pe100 Pipe (16-20 Bar and above)
  • 32 mm Pe100 Pipe (10-16-20 Bar and above)
  • 40 mm Pe100 Pipe (10-16-20 Bar and above)
  • 50 mm Pe100 Pipe (10-16-20 Bar and above)
  • 63 mm Pe100 Pipe (10-16-20 Bar and above)
  • 75 mm Pe100 Pipe (10-16-20 Bar and above)
  • 90 mm Pe100 Pipe (10-16-20 Bar)
  • 110 mm Pe100 Pipe (10-16-20 Bar)
  • 125 mm Pe100 Pipe (10-16 Bar)

Do PE 100 pipes get affected by sunlight?

PE100 pipes with UV additives have high resistance to sunlight. However, pipes exposed to sunlight without UV additives can be damaged.

Do Pe pipes corrode?

Pe pipes do not corrode; they do not undergo any reaction in the soil that would result in wall thickness loss.

Do Pe pipes float?

Pe pipes can float because they are lighter than seawater. The specific gravity of Pe pipes is 950 kg/m³. Compared to water, which has a specific gravity of 1000 kg/m³, Pe pipes do not sink. Additionally, with our floating product, we can float our pipes filled with heavy fluids on water.

What is MRS?

Raw Material ClassMRS (mpa)
PE 323.2
PE 404.0
PE 636.3
PE 808.0
PE 10010

What is SDR?

SDR stands for Standard Dimension Ratio. It is a parameter used in the identification of pipes, representing the ratio of the outer diameter to the wall thickness.

What is the difference between MDPE, HDPE, Pe 80, and Pe 100?

With the development of petrochemicals, polyethylene is classified by density:

  • LDPE (Low Density Polyethylene)
  • MDPE (Medium Density Polyethylene)
  • HDPE (High Density Polyethylene)

HDPE has higher strength than the others. The MRS value for MDPE is 8, while for HDPE products it is 10. This allows HDPE to handle higher pressure with thinner walls, providing more fluid flow. MDPE products have thicker walls, which offer advantages against external impacts causing cracks and fractures.

Can pipes with scratches or injuries on the outer surface be used?

Pe pipes with injuries on the outer surface due to production, transport, or loading and unloading can be used if the injury depth does not exceed 10% of the wall thickness.

How are Pe pipes joined?

Pe pipes can be joined using electrofusion, butt welding, and mechanical (push-fit) fittings.

At what temperature can Pe pipes be welded?

Our HDPE water pipes should be welded between 0-40°C. It is recommended to set up a welding tent if welding at negative temperatures.

Where can I get the Pe 100 pipe price list?

You can get our price list through our nearest dealer or, if you cannot reach them, by requesting it via the sales form on our website. We will provide it to you as soon as possible.

What does PVC mean?

PVC stands for polyvinyl chloride. It is a type of petrochemical product and a plastic derivative, used in many areas of our lives, such as PVC windows, PVC pipes, and PVC coatings.

What is the use of PVC pipes?

Our PVC pipes are used in the following areas:

  • Drinking water networks
  • Agricultural irrigation networks
  • Wastewater networks
  • Sewerage networks
  • Industrial facilities
  • Fire lines
  • Swimming pools
  • Drainage channels
  • Cable protection insulation

What are corrugated or corrugated pipes?

These are plastic pipes, with an outer surface produced in a wavy or flat design, used primarily in infrastructure sewage and discharge systems. They are produced to carry external loads, with the most important factor being flexibility and high ring stiffness. This makes them resistant to ground movements like earthquakes.

Can I find out the weights of corrugated pipes?

Corrugated pipes are produced from HDPE and PP materials according to production standards. Companies producing corrugated pipes do not disclose weight tables for these products as they focus on load-carrying capacity. Additionally, HDPE products can have different density characteristics. Therefore, weights are not announced. However, our company provides weights to customers upon request.

What is the lifespan of corrugated pipes?

The lifespan of corrugated pipes is a minimum of 50 years.

What materials are corrugated pipes made from?

Corrugated pipes are made from PE and PP materials.

What tests are conducted on corrugated pipes?

Ring Stiffness Test: According to ISO 9969, the SN value found must not be less than the proposed SN value. Impact Test: According to TS EN 13476-3, a maximum of 10% breakage is allowed. Leakage Test: No leakage at 0.5 bar in the joint areas (TS EN 13476-3). Length Change Test: According to TS EN 743, the length change should not exceed 3%. Hot Behavior Test: According to ISO 12091, there should be no deformation.

What is a drainage pipe?

Drainage pipes collect and transport water from high groundwater levels or artificial water collection centers to the desired location. Corrugated pipes are mainly used for this purpose, but HDPE or PVC pipes can also be used depending on the field conditions.

How much pressure can sprinkler irrigation pipes withstand?

Sprinkler irrigation pipes can withstand 6 atm pressure, but all system components may not operate under this pressure. For example, the number of sprinklers or their flow rate can be damaged by this pressure. Therefore, sprinkler irrigation systems should be operated at 2-3 bar levels.

What certificates should pipe manufacturers have?

Pipe manufacturers should have at least the ISO9000 Quality System Certificate and TSE certificates.

What tests must pipe manufacturers conduct?

Pipe manufacturers must conduct tests according to TSE and EN standards, depending on the product group. Main tests include:

  • Density test
  • Elongation at break test
  • Internal pressure test
  • MFI test
  • Ash test
  • Ring stiffness control
  • Impact test